Description
PRODUCTS & SERVICES
₱11,499
Basic Specifications
Freebie
Warranty
| Camera Function | |
| Image sensor | 1/5-inch CMOS with primary color filter |
| Number of recorded pixels | 2560 x 1920 |
| Storage media | Internal memory, microSD / microSDHC memory card |
| Storage capacity | Approximately 45 images in internal memory, approximately 850 images per 1 GB in microSD / microSDHC memory card |
| Recording method | DCF compliant Exif Ver 2.3 |
| Focus distance | f = 28 mm (35-mm film equivalent) |
| Aperture | F2.0 |
| Auto focus | Single AF (with AF Illuminator) |
| Shooting distance | 10 cm to ∞ |
| Shutter speed | 1/4 second to 1/8000 second (automatic switching) |
| Shooting sensitivity | ISO100 to 1600 (automatic switching) |
| Exposure control | Program AE |
| Exposure compensation | −2.0 EV to +2.0 EV (1/3 EV step) |
| Metering method | TTL 256 split metering, multi metering |
| White balance | Auto, Fine, Shade, Fluorescent 1, Fluorescent 2, Fluorescent 3, Incandescent |
| Flash | Auto flash / Forced flash / Suppressed flash Shooting range with flash: Approximately 50 cm to 1.5 m |
| Self-timer | Approximately 2 seconds / approximately 10 seconds |
| Image effects | 10 lens effects, 10 film effects Total of 100 effects by multiplying above |
| Print function | |
| Exposure pixel count | 1600 x 600 dots (800 x 600 dots when printed from smartphone app) |
| Exposure resolution | 25 dots / mm x 12.5 dots / mm (635 x 318 dpi, 40 x 80 μm dot pitch) 12.5 dots / mm when printed from smartphone app (318 dpi, 80 μm dot pitch) |
| Interface | Standard compliance: Bluetooth Ver. 4.2 (BLE) |
| Exposure gradation | RGB gradation of 256 colors |
| Printable image format | JPEG images taken with this unit |
| Print output time | Approximately 16 seconds * Plus 7 seconds when printed using instax-Rich Mode immediately after startup. |
| Print function | Images in the internal memory and images in the memory card can be printed |
| Reprint | Reprint is possible for images stored in print history (up to 50) |
| Other | |
| Smartphone app linked functions | Smartphone image print function, remote shooting function, printed image transfer function, firmware upgrade function |
| LCD screen | 3.0-inch TFT color LCD screen Pixel count: Approximately 460,000 dots |
| External interface | Micro USB Micro-B (for charging only) |
| Power supply | Lithium ion battery (internal type: not removable) |
| Charging function | Built-in |
| Possible number of printed images | Approximately 100 (from full charge) * The number of prints depends on the usage conditions. |
| Charging time | Approximately 2 to 3 hours * Charging time depends on the temperature. |
| Main unit dimensions | 87 mm x 122.9 mm x 36 mm (excluding projecting parts) |
| Main unit weight | Approximately 285 g |
| Operating environment | Temperature: 5ºC to 40ºC Humidity: 20% to 80% (no condensation) |
| Film used | FUJIFILM instant film "instax mini" (sold separately) |
| *Specifications above are subject to change for improvement. *The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license. |
There are no reviews yet.
